Inspiration can come from anywhere......

This is one of my favorite movies.

And when I finished the piece below, I named it, "Count Olaf".

I chuckle every time I look at it.
















The piece is about seven inches tall, made by slabbing out some porcelain, impressing it with pieces of styrofoam packing material, a sea shell, comb, and a palm-sized piece of car tail light picked up in a parking lot.


Really, I started with a freeform teardrop shape for the base.

For the sides, I made a pattern drawn on newspaper and cut out makes the shape for the two sides of the piece.

I join the two sides using a score tool and clay worms and coax it into a standing form. This has to be done by using a very light touch because I'm working with rather wet clay. I prefer to join these kinds of pieces while they are soft. It makes for better seams. I have to be very careful not to disturb the outside design.

I shape the spout, making it bulge at the base, roll the back over and smoothing it out.

I put the flattened ball of clay 'button' at the point where the form makes a radical change. This is really to reinforce the change of direction that stresses the clay. And it makes a very good design element.

I also manipulate the form mostly from the inside with dampened fingers, pushing it in or out to manipulate and emphasize the curves. And I lightly support the outside while I'm doing it.


The glaze is an iron glaze with a creamy rutile liner and the piece is fired at a cone 5/6 oxidation.